Making A new IP

Making A new IP

By ghost | 5254 Reads |

0     0

"How do I change my IP address?" and "Can I change my IP address?" are probably the most commonly asked questions. Please attempt the following then, if that does not work, visit the forums.

Windows

1. Get to a command prompt. (START, run, cmd).
2. Type "ipconfig /release" (without the quotes).
3. Type "ipconfig /renew" (without the quotes).

Windows (second option)

1. Get to a command prompt. (START, run, cmd).
2. Type "ipconfig /release" (without the quotes).
3. Shut down computer.
4. Turn off computer.
5. Turn off all ethernet hubs/switches.
6. Turn off cable/DSL modem.
7. Leave off overnight.
8. Turn everthing back on.

Network with Router

1. Log into the router's admin console. (Often http://192.168.1.1/)
2. Release the IP address. (Method varies by router manufacturer)
3. Turn off router.
4. Turn off all ethernet hubs/switches.
5. Turn off cable/DSL modem.
6. Leave off overnight.
7. Turn everything back on.

If you are using a cable/DSL modem and a router, you may wish to connect your computer directly to the cable/DSL modem. Please note that this could significantly impact your system security.

These will not work in all cases. If all else fails contact your internet service provider (ISP).